The BTS-X is the first BUMP TEST STATION which can be located in ANY WORK LOCATION.
A fully stainless steel, pneumatic system the BTS-X has no electrical or battery power, allowing it to be used in any environment.
Save time and increase productivity by having the BTS-X in the work area. Zeroing and/or testing instruments without walking or driving outside the hazard zone.
ONE BUTTON OPERATION: a simple push of a button provides up to 60 seconds of gas flow, sufficient for testing most gas detection devices. Fully stainless steel the BTS-X can be used with all gas types including corrosive gas mixtures.
BTS-X can test TWO instruments simultaneously. Designed to maximize efficiency and minimize cost the BTS-X comes built ready to be used with non-refillable (disposable) cylinders and high pressure/large volume cylinders.
The BTS-X comes complete with a mounting back plate, a two-way splitter & tubing for easy installation in minutes. The first Global Bump Testing Station for every instrument, anywhere in the world.
Max Inlet Pressure
High-Pressure Inlet: 150BAR
High-Pressure Connection: ¼” NPT Female
Low-Pressure Inlet: 70BAR
Low-Pressure Connection: C10 valve
No. of instruments: Two at the same time
Usage Temperature: -20˚C to +50˚C
Weight: 9.5 Kg
Flow time: Up to 60 seconds
Flow Rate: 1.0 litres/ minute
Dimensions (HxWxD): 350mm x 450mm x 130mm
Case: 304L Stainless Steel
Fixings: 316L Stainless Steel
Regulators: 304L Stainless Steel
Gauge: 316L Stainless Steel
Fittings/Tube: 316L Stainless Steel
Gas Compatibility: All gas types
Cylinder Compatibility: 112DA, 58DA, 60DA, 103DS and all high pressure specialty gas mixtures