CALL US 1300 CACGAS

    Specialty Gas Mixtures

     

    CAC Gas offers three ranges of specialty gas mixtures, depending on your requirements. 

    Mixtures meeting CAC’s high standard for quality will be categorized into one of these three categories based on how they are made, tested, analysed, or certified.

    CAC GAS offers a range of pure gases (Acetylene to Xenon) up to 99.999% (grade 5) in a variety of cylinder sizes.

    Accredited Producer

    Mixtures having been produced or calibrated within the scope of an ISO17034 or ISO17025 accredited organisation. Accreditation proves the producer’s technical capability in measurement, and stated traceability to SI units, having been thoroughly assessed by the relevant national testing authority. All CAC Gas Accredited mixtures will be made by a producer whose accreditation is recognised under the ILAC MRA**, so they are accepted globally. These mixtures meet the requirements of:

    • ISO/IEC17025:2017
    • ISO Guide 30:2015 (Clause 2.1.1 or 2.1.2)
    • AS2290:2018

    Certified Method

    Mixtures manufactured, analysed, or tested by specific, documented methods, and come with a certificate stating the method(s) used. Such methods may be required by industry, regulatory bodies, or internal/site standards. These methods exist to promote similar product quality and properties for a single product type from various manufacturers, or to ensure a minimum product quality. Methods may be nationally or internationally recognized, such as those from ASTM, ISO, or US EPA.

    Traceable Measurement

    Mixtures are manufactured using traceable weights and measures. This means that no matter what method is used to manufacture the mixture*, the instrumentation (scales/balances, mass flow controllers, pressure gauges, etc.) used in the manufacturing process has undergone a traceable calibration. Traceability requires that the calibration of the instrumentation be ISO17025 certified. Calibration certificates for relative instruments are kept on file and referred to on the mixture certificate if required. This shows an unbroken chain of measurements or calibrations all the way to the accepted international primary reference materials.